Stehbolzen M6x27 Krümmer Bandit 1200: Finding the Right Fasteners for Your Suzuki
Finding the correct replacement fasteners for your Suzuki Bandit 1200 exhaust system can be tricky. This guide focuses specifically on the M6x27 stehbolzen (stud bolts) used on the exhaust manifold (krümmer). We'll cover identifying the correct parts, where to source them, and potential alternatives.
Understanding the Specifications: M6x27 Stehbolzen
The specification "M6x27" refers to the metric thread size and length of the stud bolt.
- M6: This indicates a 6mm diameter thread.
- 27: This indicates a 27mm length. This is crucial; using bolts of the wrong length can cause issues with exhaust fitting and gasket sealing.
It's vital to use the correct size and material to ensure a secure and leak-free exhaust system. Improper fasteners can lead to exhaust leaks, loss of power, and even damage to your motorcycle.
Where to Find M6x27 Stehbolzen for Your Bandit 1200 Krümmer
Several options exist for sourcing these specialized fasteners:
- Suzuki Dealers: Your local Suzuki dealer will likely have these parts in stock or be able to order them. This guarantees authenticity but might be more expensive.
- Motorcycle Parts Suppliers: Online retailers specializing in motorcycle parts often carry a wide selection of fasteners. Be sure to double-check the specifications before ordering.
- Hardware Stores: While less likely to have the exact specification, some well-stocked hardware stores might have suitable alternatives. Carefully compare dimensions and material.
What Material Should I Look For?
While the exact material may vary slightly depending on the original manufacturer's specification, high-quality stainless steel is generally recommended for exhaust system fasteners. This material offers excellent corrosion resistance, essential for withstanding the heat and elements.
H2: Are there alternative fasteners that could work for my Bandit 1200 Krümmer?
While it’s always best to use the OEM specified M6x27 stehbolzen, finding exact replacements might prove difficult depending on your location. If you cannot locate the exact specification, look for stainless steel stud bolts with an M6 thread. However, meticulously check the length (27mm). Using a bolt that is too short may compromise the seal, while a bolt that is too long may interfere with other components.
H2: What happens if I use the wrong size stehbolzen?
Using incorrect stehbolzen can lead to several problems:
- Exhaust Leaks: An improper fit will create gaps, leading to exhaust leaks. This results in loss of power, noise pollution, and potential damage to your motorcycle's engine or exhaust system.
- Damaged Threads: Forcing a bolt into the wrong sized thread will strip it, rendering the fastener unusable.
- Improper Torque: Incorrect bolt length may prevent you from achieving the correct torque specification, leading to loosening and leaks over time.
H2: How many stehbolzen are typically needed for a Bandit 1200 Krümmer?
The number of stehbolzen needed will depend on the specific design of your Bandit 1200's exhaust manifold. Typically, it ranges from 3 to 4 bolts per cylinder, but you will need to examine your motorcycle’s exhaust system to determine the precise number of bolts needed.
H2: How do I install the stehbolzen correctly?
Before installing new stehbolzen, ensure the threads in the exhaust manifold are clean and free of debris. Use a suitable wrench or socket to tighten the bolts to the manufacturer's recommended torque specification. This information can typically be found in your motorcycle's service manual. Over-tightening can damage the threads, while under-tightening can lead to leaks.
By carefully considering the specifications and sourcing the correct fasteners, you can ensure a secure, leak-free exhaust system for your Suzuki Bandit 1200. Remember to always consult your service manual for specific instructions and torque recommendations.
